|
NAME | SYNOPSIS | DESCRIPTION | MODIFIERS | Filters | AUTHORS | COLOPHON |
LIBPFM(3) Linux Programmer's Manual LIBPFM(3)
libpfm_intel_skx_unc_ubo - support for Intel Skylake X Server IIO
uncore PMU
#include <perfmon/pfmlib.h>
PMU name: skx_unc_iio[0-5]
PMU desc: Intel Skylake X Server IIO uncore PMU
The library supports the Intel Skylake X server IIO uncore PMU. The
IIO PMU is used to analyze I/O traffic from the PCIe controllers.
The following modifiers are supported on Intel Skylake X server IIO
uncore PMU:
e Enable edge detection, i.e., count only when there is a state
transition from no occurrence of the event to at least one
occurrence. This modifier must be combined with a threshold
modifier (t) with a value greater or equal to one. This is a
boolean modifier.
t Set the threshold value. When set to a non-zero value, the
counter counts the number of HA cycles in which the number of
occurrences of the event is greater or equal to the threshold.
This is an integer modifier with values in the range [0:15].
i Invert the meaning of the threshold or edge filter. If set,
the event counts when strictly less than N occurrences occur
per cycle if threshold is set to N. When invert is set, then
threshold must be set to non-zero value. If set, the event
counts when the event transitions from occurring to not
occurring (falling edge) when edge detection is set. This is a
boolean modifier
Events UNC_IO_COMP_BUF_INSERTS, UNC_IO_DATA_REQ_BY_CPU,
UNC_IO_DATA_REQ_OF_CPU, support additional filtering via a set of
umasks tracking requests completions. They umasks start with a FC_
prefix. The other filter is the port filter and it is hardcoded as
umasks for the same events.
Stephane Eranian <eranian@gmail.com>
This page is part of the perfmon2 (a performance monitoring library)
project. Information about the project can be found at
⟨http://perfmon2.sourceforge.net/⟩. If you have a bug report for this
manual page, send it to perfmon2-devel@lists.sourceforge.net. This
page was obtained from the project's upstream Git repository
⟨git://git.code.sf.net/p/perfmon2/libpfm4 perfmon2-libpfm4⟩ on
2020-08-13. (At that time, the date of the most recent commit that
was found in the repository was 2020-08-12.) If you discover any
rendering problems in this HTML version of the page, or you believe
there is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
January, 2018 LIBPFM(3)