|
NAME | SYNOPSIS | DESCRIPTION | ARPTABLES COMMAND LINE ARGUMENTS | NOTES | MAILINGLISTS | SEE ALSO | COLOPHON |
ARPTABLES(8) System Manager's Manual ARPTABLES(8)
arptables - ARP table administration (nft-based)
arptables [-t table] -[AD] chain rule-specification [options]
arptables [-t table] -[RI] chain rulenum rule-specification [options]
arptables [-t table] -D chain rulenum [options]
arptables [-t table] -[LFZ] [chain] [options]
arptables [-t table] -[NX] chain
arptables [-t table] -E old-chain-name new-chain-name
arptables [-t table] -P chain target [options]
arptables is a user space tool, it is used to set up and maintain the
tables of ARP rules in the Linux kernel. These rules inspect the ARP
frames which they see. arptables is analogous to the iptables user
space tool, but arptables is less complicated.
CHAINS
The kernel table is used to divide functionality into different sets
of rules. Each set of rules is called a chain. Each chain is an
ordered list of rules that can match ARP frames. If a rule matches an
ARP frame, then a processing specification tells what to do with that
matching frame. The processing specification is called a 'target'.
However, if the frame does not match the current rule in the chain,
then the next rule in the chain is examined and so forth. The user
can create new (user-defined) chains which can be used as the
'target' of a rule.
TARGETS
A firewall rule specifies criteria for an ARP frame and a frame
processing specification called a target. When a frame matches a
rule, then the next action performed by the kernel is specified by
the target. The target can be one of these values: ACCEPT, DROP,
CONTINUE, RETURN, an 'extension' (see below) or a user-defined chain.
ACCEPT means to let the frame through. DROP means the frame has to
be dropped. CONTINUE means the next rule has to be checked. This can
be handy to know how many frames pass a certain point in the chain or
to log those frames. RETURN means stop traversing this chain and
resume at the next rule in the previous (calling) chain. For the
extension targets please see the TARGET EXTENSIONS section of this
man page.
TABLES
There is only one ARP table in the Linux kernel. The table is
filter. You can drop the '-t filter' argument to the arptables
command. The -t argument must be the first argument on the arptables
command line, if used.
-t, --table
filter, is the only table and contains two built-in chains:
INPUT (for frames destined for the host) and OUTPUT (for
locally-generated frames).
After the initial arptables command line argument, the remaining
arguments can be divided into several different groups. These groups
are commands, miscellaneous commands, rule-specifications, match-
extensions, and watcher-extensions.
COMMANDS
The arptables command arguments specify the actions to perform on the
table defined with the -t argument. If you do not use the -t
argument to name a table, the commands apply to the default filter
table. With the exception of the -Z command, only one command may be
used on the command line at a time.
-A, --append
Append a rule to the end of the selected chain.
-D, --delete
Delete the specified rule from the selected chain. There are
two ways to use this command. The first is by specifying an
interval of rule numbers to delete, syntax: start_nr[:end_nr].
Using negative numbers is allowed, for more details about
using negative numbers, see the -I command. The second usage
is by specifying the complete rule as it would have been
specified when it was added.
-I, --insert
Insert the specified rule into the selected chain at the
specified rule number. If the current number of rules equals
N, then the specified number can be between -N and N+1. For a
positive number i, it holds that i and i-N-1 specify the same
place in the chain where the rule should be inserted. The
number 0 specifies the place past the last rule in the chain
and using this number is therefore equivalent with using the
-A command.
-R, --replace
Replaces the specified rule into the selected chain at the
specified rule number. If the current number of rules equals
N, then the specified number can be between 1 and N. i
specifies the place in the chain where the rule should be
replaced.
-P, --policy
Set the policy for the chain to the given target. The policy
can be ACCEPT, DROP or RETURN.
-F, --flush
Flush the selected chain. If no chain is selected, then every
chain will be flushed. Flushing the chain does not change the
policy of the chain, however.
-Z, --zero
Set the counters of the selected chain to zero. If no chain is
selected, all the counters are set to zero. The -Z command can
be used in conjunction with the -L command. When both the -Z
and -L commands are used together in this way, the rule
counters are printed on the screen before they are set to
zero.
-L, --list
List all rules in the selected chain. If no chain is selected,
all chains are listed.
-N, --new-chain
Create a new user-defined chain with the given name. The
number of user-defined chains is unlimited. A user-defined
chain name has maximum length of 31 characters.
-X, --delete-chain
Delete the specified user-defined chain. There must be no
remaining references to the specified chain, otherwise
arptables will refuse to delete it. If no chain is specified,
all user-defined chains that aren't referenced will be
removed.
-E, --rename-chain
Rename the specified chain to a new name. Besides renaming a
user-defined chain, you may rename a standard chain name to a
name that suits your taste. For example, if you like
PREBRIDGING more than PREROUTING, then you can use the -E
command to rename the PREROUTING chain. If you do rename one
of the standard arptables chain names, please be sure to
mention this fact should you post a question on the arptables
mailing lists. It would be wise to use the standard name in
your post. Renaming a standard arptables chain in this fashion
has no effect on the structure or function of the arptables
kernel table.
MISCELLANOUS COMMANDS
-V, --version
Show the version of the arptables userspace program.
-h, --help
Give a brief description of the command syntax.
-j, --jump target
The target of the rule. This is one of the following values:
ACCEPT, DROP, CONTINUE, RETURN, a target extension (see TARGET
EXTENSIONS) or a user-defined chain name.
-c, --set-counters PKTS BYTES
This enables the administrator to initialize the packet and
byte counters of a rule (during INSERT, APPEND, REPLACE
operations).
RULE-SPECIFICATIONS
The following command line arguments make up a rule specification (as
used in the add and delete commands). A "!" option before the
specification inverts the test for that specification. Apart from
these standard rule specifications there are some other command line
arguments of interest.
-s, --source-ip [!] address[/mask]
The Source IP specification.
-d, --destination-ip [!] address[/mask]
The Destination IP specification.
--source-mac [!] address[/mask]
The source mac address. Both mask and address are written as 6
hexadecimal numbers separated by colons.
--destination-mac [!] address[/mask]
The destination mac address. Both mask and address are written
as 6 hexadecimal numbers separated by colons.
-i, --in-interface [!] name
The interface via which a frame is received (for the INPUT
chain). The flag --in-if is an alias for this option.
-o, --out-interface [!] name
The interface via which a frame is going to be sent (for the
OUTPUT chain). The flag --out-if is an alias for this option.
-l, --h-length length[/mask]
The hardware length (nr of bytes)
--opcode code[/mask]
The operation code (2 bytes). Available values are: 1=Request
2=Reply 3=Request_Reverse 4=Reply_Reverse 5=DRARP_Request
6=DRARP_Reply 7=DRARP_Error 8=InARP_Request 9=ARP_NAK.
--h-type type[/mask]
The hardware type (2 bytes, hexadecimal). Available values
are: 1=Ethernet.
--proto-type type[/mask]
The protocol type (2 bytes). Available values are: 0x800=IPv4.
TARGET-EXTENSIONS
arptables extensions are precompiled into the userspace tool. So
there is no need to explicitly load them with a -m option like in
iptables. However, these extensions deal with functionality
supported by supplemental kernel modules.
mangle
--mangle-ip-s IP address
Mangles Source IP Address to given value.
--mangle-ip-d IP address
Mangles Destination IP Address to given value.
--mangle-mac-s MAC address
Mangles Source MAC Address to given value.
--mangle-mac-d MAC address
Mangles Destination MAC Address to given value.
--mangle-target target
Target of ARP mangle operation (DROP, CONTINUE or ACCEPT --
default is ACCEPT).
CLASSIFY
This module allows you to set the skb->priority value (and thus
clas- sify the packet into a specific CBQ class).
--set-class major:minor
Set the major and minor class value. The values are
always interpreted as hexadecimal even if no 0x prefix is
given.
MARK
This module allows you to set the skb->mark value (and thus
classify the packet by the mark in u32)
--set-mark mark
Set the mark value. The values are always interpreted as
hexadecimal even if no 0x prefix is given
--and-mark mark
Binary AND the mark with bits.
--or-mark mark
Binary OR the mark with bits.
In this nft-based version of arptables, support for FORWARD chain has
not been implemented. Since ARP packets are "forwarded" only by Linux
bridges, the same may be achieved using FORWARD chain in ebtables.
See http://netfilter.org/mailinglists.html
xtables-nft(8), iptables(8), ebtables(8), ip(8)
See https://wiki.nftables.org
This page is part of the iptables (administer and maintain packet
filter rules) project. Information about the project can be found at
⟨http://www.netfilter.org/⟩. If you have a bug report for this man‐
ual page, see ⟨http://bugzilla.netfilter.org/⟩. This page was
obtained from the project's upstream Git repository
⟨git://git.netfilter.org/iptables⟩ on 2020-08-13. (At that time, the
date of the most recent commit that was found in the repository was
2020-07-31.) If you discover any rendering problems in this HTML
version of the page, or you believe there is a better or more up-to-
date source for the page, or you have corrections or improvements to
the information in this COLOPHON (which is not part of the original
manual page), send a mail to man-pages@man7.org
March 2019 ARPTABLES(8)
Pages that refer to this page: arptables-nft-restore(8) , arptables-nft-save(8) , arptables-restore(8) , arptables-save(8) , ip6tables-translate(8) , iptables-translate(8) , xtables-nft(8) , xtables-translate(8)