|
NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | AUTHORS | COLOPHON |
RDMA-STATISTIC(8) Linux RDMA-STATISTIC(8)
rdma-statistic - RDMA statistic counter configuration
rdma [ OPTIONS ] statistic { COMMAND | help }
rdma statistic { OBJECT } show
rdma statistic [ OBJECT ] show link [ DEV/PORT_INDX ] [ FILTER_NAME
FILTER_VALUE ]
rdma statistic OBJECT mode
rdma statistic OBJECT set COUNTER_SCOPE [ DEV/PORT_INDEX ] auto {
CRITERIA | off }
rdma statistic OBJECT bind COUNTER_SCOPE [ DEV/PORT_INDEX ] [ OBJECT-
ID ] [ COUNTER-ID ]
rdma statistic OBJECT unbind COUNTER_SCOPE [ DEV/PORT_INDEX ] [
COUNTER-ID ] [ OBJECT-ID ]
COUNTER_SCOPE := { link | dev }
OBJECT := { qp | mr }
CRITERIA := { type }
FILTER_NAME := { cntn | lqpn | pid }
rdma statistic [object] show - Queries the specified RDMA device for RDMA
and driver-specific statistics. Show the default hw counters if
object is not specified
DEV - specifies counters on this RDMA device to show.
PORT_INDEX - specifies counters on this RDMA port to show.
FILTER_NAME - specifies a filter to show only the results matching
it.
rdma statistic <object> set - configure counter statistic auto-mode for a
specific device/port
In auto mode all objects belong to one category are bind
automatically to a single counter set. Not applicable for MR's.
rdma statistic <object> bind - manually bind an object (e.g., a qp) with
a counter
When bound the statistics of this object are available in this
counter. Not applicable for MR's.
rdma statistic <object> unbind - manually unbind an object (e.g., a qp)
from the counter previously bound
When unbound the statistics of this object are no longer available in
this counter; And if object id is not specified then all objects on
this counter will be unbound. Not applicable for MR's.
COUNTER-ID - specifies the id of the counter to be bound. If this
argument is omitted then a new counter will be allocated.
rdma statistic show
Shows the state of the default counter of all RDMA devices on the
system.
rdma statistic show link mlx5_2/1
Shows the state of the default counter of specified RDMA port
rdma statistic qp show
Shows the state of all qp counters of all RDMA devices on the
system.
rdma statistic qp show link mlx5_2/1
Shows the state of all qp counters of specified RDMA port.
rdma statistic qp show link mlx5_2 pid 30489
Shows the state of all qp counters of specified RDMA port and
belonging to pid 30489
rdma statistic qp mode
List current counter mode on all devices
rdma statistic qp mode link mlx5_2/1
List current counter mode of device mlx5_2 port 1
rdma statistic qp set link mlx5_2/1 auto type on
On device mlx5_2 port 1, for each new QP bind it with a counter
automatically. Per counter for QPs with same qp type in each
process. Currently only "type" is supported.
rdma statistic qp set link mlx5_2/1 auto off
Turn-off auto mode on device mlx5_2 port 1. The allocated
counters can be manually accessed.
rdma statistic qp bind link mlx5_2/1 lqpn 178
On device mlx5_2 port 1, allocate a counter and bind the
specified qp on it
rdma statistic qp unbind link mlx5_2/1 cntn 4 lqpn 178
On device mlx5_2 port 1, bind the specified qp on the specified
counter
rdma statistic qp unbind link mlx5_2/1 cntn 4
On device mlx5_2 port 1, unbind all QPs on the specified counter.
After that this counter will be released automatically by the
kernel.
rdma statistic show mr
List all currently allocated MR's and their counters.
rdma statistic show mr mrn 6
Dump a specific MR statistics with mrn 6. Dumps nothing if does
not exists.
rdma(8), rdma-dev(8), rdma-link(8), rdma-resource(8),
Mark Zhang <markz@mellanox.com>
Erez Alfasi <ereza@mellanox.com>
This page is part of the iproute2 (utilities for controlling TCP/IP
networking and traffic) project. Information about the project can
be found at
⟨http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2⟩.
If you have a bug report for this manual page, send it to
netdev@vger.kernel.org, shemminger@osdl.org. This page was obtained
from the project's upstream Git repository
⟨https://git.kernel.org/pub/scm/network/iproute2/iproute2.git⟩ on
2020-08-13. (At that time, the date of the most recent commit that
was found in the repository was 2020-06-24.) If you discover any
rendering problems in this HTML version of the page, or you believe
there is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
iproute2 27 June 2019 RDMA-STATISTIC(8)
Pages that refer to this page: rdma(8) , rdma-dev(8) , rdma-link(8) , rdma-resource(8)